Lab Home | Phone | Search
Center for Nonlinear Studies  Center for Nonlinear Studies
 Colloquia Archive 
 Postdoc Seminars Archive 
 Quantum Lunch 
 CMS Colloquia 
 Q-Mat Seminars 
 Q-Mat Seminars Archive 
 Kac Lectures 
 Dist. Quant. Lecture 
 Ulam Scholar 
 Summer Research 
 Past Visitors 
 History of CNLS 
 Maps, Directions 
 CNLS Office 
Tuesday, June 23, 2009
10:00 AM - 11:30 AM
CNLS Conference Room (TA-3, Bldg 1690)


Efficient nonlinear solvers for nodal high-order finite elements in 3D

Jed Brown
Laboratory of Hydraulics, Hydrology, and Glaciology ETH-Zurich

Conventional high-order finite element methods are rarely used for industrial problems because the Jacobian rapidly loses sparsity as the order is increased, leading to unaffordable solve times and memory requirements. This effect typically limits order to at most quadratic, despite the favorable accuracy and stability properties offered by quadratic and higher order discretizations. We present a method in which the action of the Jacobian is applied matrix-free exploiting a tensor product basis on hexahedral elements, while much sparser matrices based on Q1 sub-elements on the nodes of the high-order basis are assembled for preconditioning. With this "dual-order" scheme, storage is independent of spectral order and a natural taping scheme is available to update a full-accuracy matrix-free Jacobian during residual evaluation. Matrix-free Jacobian application circumvents the memory bandwidth bottleneck typical of sparse matrix operations, providing several times greater floating point performance and better use of multiple cores with shared memory bus. Computational results for the p-Laplacian and Stokes problem with power-law rheology, using block preconditioners and AMG, demonstrate mesh-independent convergence rates and weak (bounded) dependence on order, even for highly deformed meshes and nonlinear systems with several orders of magnitude dynamic range in coefficients. For spectral orders around 5, the dual-order scheme requires half the memory and time of assembled quadratic (Q2) elements, making it very affordable for general use.

Host: William H. Lipscomb E-mail: